POWER. COOL. MONITOR. MANAGE. 
DOWNLOADS & UPDATES
Firmware Update v3.9.0 is now available
Changes contained in version v3.9.0 (1/16/2011):
-Note: Geist firmware v3.x.y represents a major hardware change.
-Note: Devices running firmware prior to v3.0.0 cannot be upgraded to this version.
-Note: See below for the latest Geist v2.xx firmware.
-Note: Due to changes in the measurement logging system updating to this firmware from versions prior to 3.4.0 will erase your log history. Please download and save your log history prior to updating if you wish to maintain it.
-Added alarm configuration via SNMP, see new alarmSystem table.
-Added alarmTrigger and alarmInstance to all SNMP traps.
-Improved speed of HTTPS in some browsers.
-Changed SNMP alarmTripType and temperaturePrecision to integer enumerations.
-Fixed page load errors when the browser's language is not natively supported.
-Fixed a potential loss of connectivity under heavy network traffic.
-Fixed errors in Geist Console when device's language is not set to English.
-Updated copyrights to 2012
BB100 Firmware Update v1.3.1 is now available
Changes contained in version v1.3.1 (1/16/2011):
-Note: Downgrading from version 1.3.X to 1.2.X is not recommended. Doing so may cause the unit to reset to default values.
-Fixed a problem that prevented user accounts from being set.
-Fixed SNMP GETs for extremely long OIDs could cause SNMP to become unresponsive.
-Navigation bar now scrolls with the page.
-Other minor improvements.
-Updated copyrights to 2012.
EM (Ethernet Meter) Firmware Update 2.08 is now available
Changes contained in version 2.08 (10/18/2011):
-Note: EM 2.xx upgrades require the use of Geist ASU v1.9 or newer
-Added 2-tier authentication
-Updated Geist logo
-Changed copyrights to 2011
Firmware Update v2.98 is now available
Changes contained in version v2.98 (6/29/2011):
-Note: Temperature logs were rescaled in v2.94. If updating from firmware before v2.94 temperature logs will be rescaled after updating to this firmware. Please download and save your log history prior to updating if you wish to maintain it.
-Fixed RSMINI163 IO port traps going out with wrong trap ID
Geist ASU
The Geist Automated Smart Updater (ASU) is a software tool for simultaneously updating multiple Geist IP-enabled devices
-Update multiple units simultaneously
-Supports R-Series (formerly RacSense) v2 and v3
-Supports EM v1 and v2
-Supports BB-Series
-Required for upgrades from EM v1 to EM v2
SNMP MIBs
Using SNMP?
The MIB and OID Tree make Integrating Geist products easy.
MIB and OID Tree are now available in the Firmware Download.
CS-3 Software Version 3.1.6 is now available
Management software for all your Geist IP addressable products, call for a license code.
Note: Default username/password is admin/console250
Changes contained in version 3.1.6 (10/17/2011)
-Added support for BB100 devices.
-Fixed alarms on non-English units causing errors.
-Analog measurements now show custom min/max values.
-Dew point values are reported with the correct temperature units.
-Fixed a Panasonic camera compatibility bug.
-Camera passwords are saved to disk and remembered at next restart.
CS-3 Lite Software Version 3.1.6 is now available
Free Management software for your Geist IP addressable products, limit 2 devices connected.
Note: Default username/password is admin/console250
Excel Data Logger
Using XML? Here is an example of simple code to interface with the Geist products.
-Excel template for extracting data from Geist devices via XML
-No specialized software needed, only Excel
-Can be modified
