DEMO - GM6 (Demo Mode)EM8/GM6 v1.19192.168.123.123 |
 |
| Sensors | Configuration | XML | MIB |
Configuration
| Friendly Name: | |
 | |
| Network Settings | |
| IP Address: | |
| Subnet Mask: | |
| Gateway: | |
| MAC Address: | |
|
| |
| SNMP Settings | |
| SNMP Community: | |
| Trap IP Address: | |
| Trap Community: | |
| Note: Leave trap IP address blank to disable traps. | |
|
| |
| Alarm Settings | |
| Circuit 1: | |
| Circuit 2: | |
| Circuit 3: | |
| Circuit 4: | |
| Circuit 5: | |
| Circuit 6: | |
| If the amp reading is greater than or
equal to the entered value, an alarm is sent (if enabled). Supports integer values only. Enter 0 to disable traps for that channel. | |
|
| |